Home > Hp Color > Hp Color Laserjet 3500 Error 47.01

Hp Color Laserjet 3500 Error 47.01

Press the ridges on the tab on the left side of the door, and fit the peg into the round hole. 13. Page 116: Cleaning The Printer And Accessories, Cleaning Spilled Toner, Table 4-1. It took me about 6 hours to disassemble an reassemble the thing.The biggest problem was the left swing rod, that had come apart - I needed to remove the whole left Place the used print cartridge in the bag for recycling. 4. this content

I had 59.99 errors occasionally but getting more frequent. Figure notes 1. San Rafael, CA Great that you have that part in stock and thank you for your quick reply. These assemblies are described in the Installation and configuration chapter. http://www.fixyourownprinter.com/posts/46228

PrinterTechs.com 608-831-2396 or 866-352-7108 About Us Contact Us Search Products Search Support All Products PrintersHewlett PackardLexmarkCables and Misc.JetDirect CardsBrotherKyoceraDell Toner Maintenance Kits Printers Parts Tech Support Account Login Shopping Cart My HP Color LaserJet 3500/3550 printer ...............3 Figure 1-2. Do not use any voltage other than the operating voltage. To install the HP Jetdirect print server card 1.

Remove a new print cartridge from the bag. 2. by moe on Jul 13, 2015 at 11:21am Add comment Please sign in to comment on first hand i wanna thank you moe for answer, as you say the foam was They are the DC positive biases, one for each color (C, Y, M, K), generated in the primary transfer high-voltage generation circuit in the high-voltage power suppl ERROR The requested URL The HP Color LaserJet 3700 printer is a four-color laser printer that prints 16 ppm in both monochrome and color.

Connect the AC power cord to the printer and to a power outlet. Use the blue handles on both sides to hold the transfer unit. Set the tray media size to the specific envelope NOTE size. http://www.printertechs.com/printer-troubleshooting/409-50-9-fuser-error-hp-color-laserjet-3500-3550-3700 The automatic paper delivery system is activated if a residual paper is detected.

Chapter contents ........................4 1 Search approach ........................4 2 Parts and supplies ........................43 Ordering parts ........................43 Ordering supplies ......................43 Exchange program ......................44 Supplies ..........................4 4 World Wide Web .......................44 HP service parts Pull Tray 2 out of the printer. 2. Check the paper input sensor flag located just above the paper tray. Page 41: Table 1-9.

  1. A parallel connection is made by connecting the printer to the computer using a bidirectional parallel cable (IEEE-1284 compliant) with a b-connector plugged into the printer parallel port.
  2. Scanner motor control ................... 1 44 Figure 5-24.
  3. Page 114 Chapter 3 Installation and configuration ENWW...
  4. by moe on Mar 10, 2014 at 10:01am Add comment Please sign in to comment couple small pieces of electical tape will work - chowliewantanobi moe, youre genius, how the f.uck
  5. Location of solenoids and clutches ...............454 Figure 7-22.
  6. Switch locations ....................250 Figure 6-67.
  7. Page 129 4.

Also in step 13 (reinstallation tip), you should also insert the axle for gear 1 into the printer, because it needs to grab a keyed hole inside the printer.9. this website Page 8: Table Of Contents Canadian DOC regulations ....................37 EMI statement (Korea) .....................37 VCCI statement (Japan) ....................37 Laser statement for Finland ....................3 8 FCC Regulations ........................3 9 2 Service approach Chapter The pickup roller is part of the 200K page maintenance kit, but for some reason the paper separation pad is not. Thanks !xoxo C.

Wait 10 minutes before proceeding. news The phone numbers for ordering supplies are: ● U.S. We do not sell these spare parts.We help you to create your parts sheets to request from your suppliers. To reattach the lower rear door (rear output bin), hold the door at a 45° angle, and fit the peg into the round hole on the right side.

Two thermistors monitor fuser (fixing) heater temperature: ●... Privacy Policy Terms of Use Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Press the black ridges on the front of the fuser until the fuser clicks into place. have a peek at these guys Create your Spare Parts List.

Slide out the lower rear door (rear output bin) tray extender. Page 127: Replacing The Fuser And Pickup Roller NOTE If the old transfer unit was not at end-of-life when it was replaced (for example, if it was damaged), the transfer unit Tray 2 paper sizes Media Dimensions Weight or thickness Capacity Letter 216 by 279 mm 250 sheets 60 to 105 g/m (8.5 by 11 in) (16 to 28 lb bond) (75

If HP Color LaserJet Soft Gloss paper is not used with this printer, print quality may be compromised.

Page 92: Network Configuration Network configuration NOTE The network configuration feature is available for the HP Color LaserJet 3700 series printer when an EIO device is installed. Page 38 Table 1-5. Page 152 The heater temperature control controls the drive signals of the fuser heater to monitor and maintain the surface temperatures of the fuser sleeve and the fuser heater at the Interface troubleshootingpage 427................................................................................................................................................................

EIO network cards can maximize printer performance when printing from a network. The HP Jetdirect print server supports Novell Directory Services (NDS), as well as bindery modes. Page 62: Laser Statement For Finland 3, Laser Statement For Finland Laser statement for Finland Luokan 1 laserlaite Klass 1 Laser Apparat HP Color LaserJet 3550, 3550n, 3700, 3700n, 3700dn, 3700dtn, http://isker.org/hp-color/hp-color-laserjet-3500-error-code.html The connector is located on left rear of ITB drawer and the corresponding mating connector is on the chassis.

Power-on sequence Figure 5-2. Using handles, remove the new transfer unit from the bag. Any help here would be appreciated too. Then I reversed the order.

Works great and certainly solved the problem (as I expected it would). -Alan A. Control panel troubleshootingpage 431................................................................................................................................................................ I truly appreciate it. Page 144 NOTE See the General circuit diagram in Chapter 7, for detailed information on the printer circuitry.

The HP Color LaserJet 3550 printer prints 16 pages per minute (ppm) in both monochrome (black and white) and color. HP Color LaserJet 3700n printer ..............4 Figure 1-5. Left front cover removal (3 of 3) ..............213 Figure 6-10. Drives the feed roller, Stepping motor Clockwise/ 5-speed (full, 1/2,...

Static electricity can damage DIMMs. Can be caused by defective drum unit - look for repetitive horizontal lines. Your cache administrator is webmaster. High-voltage power supply circuit Figure 5-15.

Locate the color slot for the print cartridge. 5. Page 27: Printer Configurations, Hp Color Laserjet 3500/3550 Printer, Hp Color Laserjet 3500n/3550n Printer Printer configurations HP Color LaserJet 3500/3550 printer HP Color LaserJet 3500/3550 printer Figure 1-1. PrintCopy .infoservice Service manual Parts List Error Code Equivalency Sign In Contacts About Us Service manual Error Code Parts List Equivalency Complete information for maintenance and repair printers, copiers, fax-machines The two release levers are located on the left and right side of the lower rear door. 7.

Your cache administrator is webmaster.


© Copyright 2017 isker.org. All rights reserved.